<p id="8ib49"></p>
<td id="8ib49"><option id="8ib49"></option></td><td id="8ib49"><option id="8ib49"></option></td>
  • 
    
    <pre id="8ib49"><label id="8ib49"><menu id="8ib49"></menu></label></pre><table id="8ib49"><strike id="8ib49"></strike></table>
    1. <track id="8ib49"></track>

      Whether or not the tiles need to be slit

      People who have the decoration experience may have seen that the decoration master will leave a seam between the tile and the tile. if the seamless paving, not only make the wall or floor look more smooth and tidy, and also easier to clean up.

      1、 Leave seams to prevent other problems with tiles

      Take up

      Tiles will swell due to temperature changes, and the cement used will dry out after applying, and produce a force. If the seamless paving, tiles will be empty drums, deformation, cracking, chipping and other issues.

      2、 Seams can reduce the negative effects of tile errors

      Take up

      All tiles have some degree of error in length, straightness, and straightness. These errors can lead to suture is not straight, unsightly and other issues. Appropriate leave seams ensure that patchwork seams are neat, avoiding other problems due to tile size deviations.


      3、Reduce the uneven joints caused by the construction error

      Take up

      Paving tiles is a very rigorous job. Technical requirements for paving workers are very strict. Construction process inevitably there will be some errors, keep the seam can adjust the tiling operation of the overall effect.

      4、Can save the material

      Take up

      The tile retention and paving is easy to adjust the spacing of bricks in accordance with the size of the real area, so that the whole brick is used as much as possible in the corner of the house. It is both beautiful and time-saving.

      5、 Can leave no seams when laying seamless tiles?

      Take up

      Now there are "seamless tiles" products on the market, but the it can only ensure that not completely seamless. In practical, the technical requirements of seamless tiles are higher, and the control of cross stitches and wrong platforms is more stringent.

      6、 How wide is the width of the tile paving?

      Take up

      There is no uniform standard for the size of seam. In general, rustic tiles are recommended to leave a seam of 3-5mm better, and home tiles can be left around 3mm. Nowadays, there is a cross on the market that is specially used for tile joints. The width is 1mm, 2mm, 3mm, 5mm, etc. The use of a cross to leave seams can ensure that the seams of the tiles are straight and the gaps are uniform in size.

      How much wastage should be reserved for tile

      The loss of tiles is not to be ignored. If purchase too many tiles will cause unnecessary waste. Conversely, if you purchase too few tiles, you will have a tedious replenishment process. In addition to the actual amount of tiles, the loss of tiles is also need to added.

      How to reduce the loss of tile laying?

      When you buy the tiles, you should buy more tiles because when purchased again may the tile not be the same batch as the original ones. There is a color difference problem. To prevent this from happening, we recommend buying as many boxes of tiles as possible to prevent breakage and insufficient quantity. And please professionally decorate workers to decorate.

      Why the glazed tiles are always popular?

      Glazed tile is a type of porcelain tile that has glazing and has been fired at high temperature. The surface texture of the product is very beautiful and varied. It is the most popular architectural tile product. The glazed tile is usually composed of two parts: a tile body and a glazed layer. The tile body provides a strong physical and chemical properties. The glazed layer provides a good foundation layer for the tile surface to provide various patterns and pattern effects.

      Why should the tiles be boiled in the decoration

      Most people might think that taking a piece of paving tile tile directly cast cement paste up? But in fact, tiles need to be soaked. Why soak in water? How should we soak in water? Let me share some little knowledge for everyone.
      Tiles are soaked in water to prevent the absorption of water cement mortar, so as to avoid emptying, falling off, or even cracks, especially using be the wall tile. The soaking of water in front of the paving is to make its pores fully absorb water. Since porcelain density greater porosity smaller, so that there is a very low water absorption.

      精品自产视频在线观看
      <p id="8ib49"></p>
      <td id="8ib49"><option id="8ib49"></option></td><td id="8ib49"><option id="8ib49"></option></td>
    2. 
      
      <pre id="8ib49"><label id="8ib49"><menu id="8ib49"></menu></label></pre><table id="8ib49"><strike id="8ib49"></strike></table>
      1. <track id="8ib49"></track>